RM6 – compact switchgear

Compact switchgear – RM6, designed for installation in open/closed ring and radial medium voltage power supply circuits for industrial processes and in life support systems of residential, social, commercial and industrial buildings.

Sealed RM6 cubicle with IP67 high voltage module, IP3X low voltage compartment, IP3X front panel device, IP2XC cable compartment and IK07 protection against mechanical damage.

Our principles for solving the assigned tasks

  • Flexibility and speed in decisions
  • Energy efficiency
  • Environmental Safety
RM6 - Compact Switchgear Kiev, Ukraine

RM6 – Compact Switchgear Kiev, Ukraine

Modern and reliable power supply and automation solutions

for offices and business centers
for cafes, restaurants, hotels
for a private house and apartments
for shops and shopping and entertainment centers
for banks and financial institutions
for manufacturing enterprises
for educational centers and institutions
for medical centers

Cell RM6

RM6 is a compact switchgear designed for installation in radial, trunk and loop distribution networks for 6, 10, 20 kV. RM6 performs the functions of connecting, supplying and protecting one or two distribution transformers up to 3,000 kVA using a circuit breaker with protection. Switchgear and busbars are housed in a sealed enclosure filled with SF6 gas and “sealed” for life.

RM6 Features

RM6 allows you to organize a nodal substation in 2, 3 or 4 directions:

  • with line protection by 630 A circuit breaker;
  • with line switching by load break switch;
  • with built-in power supply for telecontrol devices.

Construction RM6

RM6 is a small-sized switchgear consisting of 1-4 built-in functional blocks. This fully isolated monoblock consists of:

  • hermetically sealed stainless steel enclosure, “sealed” for life, containing all active parts, load break switches, earthing switches or switches;
  • one to four cable compartments for mains or transformer connection;
  • secondary circuit compartment;

Technical data compact switchgear RM6

The RM6 specifications comply with the IEC requirements for pressurized systems “sealed” for life. Load break switches and earthing switches meet all operating requirements.

Tightness

The casing is filled with SF6 gas at an overpressure of 0.2 bar. After filling, it is “sealed” at the factory. Each RM6 is thoroughly tested for tightness, which guarantees a service life of at least 30 years. No RM6 service is required for this period.

Load break switch

Electric arc extinguishing is carried out on the basis of the SF6 gas blowing principle, which allows switching off short-circuit currents.

Extensibility

In all cases where the adverse environmental impact, as well as the requirements for compactness and safety predetermine, on the one hand, the use of hermetic monoblocks RM6, and, on the other hand, the development of the network requires an increase in the number of connections at the substation, the new generation RM6 offers the ideal solution – the ability to build new functions. The RM6 can be expanded by simply adding one or more functional blocks, which are interconnected at the busbar level using shielded plug-in contacts, while maintaining the integrity of the factory monoblocs. This is a very simple operation, easily done on site and does not require:

  • no SF6 handling;
  • special tools and devices;
  • special floor preparation.

The only technical limitation for the RM6 expansion is the rated current of the busbars: 630 A at + 40 ° C.

Certificates and Licenses

Schneider Electric Shield Panel Official Partner Certificate
Сертификат официального партнера щитовика Shneider Electric
List of types of construction works
Перечень видов работ по строительству объектов
License of the State Architectural and Construction Inspection of Ukraine
Лизензия государственной архитектурно-строительной инспекции Украины
Work permit
Разрешение на работы

Own production

Our own high-tech production, cooperation with manufacturers of reliable and modern components, as well as extensive experience in projects of various levels of complexity allows us to implement the ideas of our clients at reasonable prices.

We use only reliable components

We use only reliable components from well-known world manufacturers

Prices for electrical services

01

Prices for electrical services depend on the scope of the project, conditions and features of the installation of structures at the facility.

02

The price for electrical services is much lower if you order design, production and installation from our company.

03

The exact cost of electrical services is announced when calculating the estimate of the task.

Feedback from our clients

The whole range of turnkey works in one campaign!

Calculation
Design
Manufacturing
Delivery
Mounting
Service